Tinley Bowl

7601 W. 183rd Street, Tinley Park, Illinois

Architect: RKG Design Group

Masonry

Furnish, set-up, maintain, dismantle and remove all equipment (forklift, tube scaffolding, ladders, hand tools, etc.) necessary for the masonry portion of the project.
Furnish and install a combination of Modular size face brick (Belden Polar White), caulked 2-1/4” * 5” rock faced limestone sills, and Semco Yukon Ledge natural stone necessary to erect new masonry veneer walls up to 9’-10” in height as per drawings. Brick and block is to be installed standard running bond using natural gray type ‘N’ mortar. Mortar joints are to be tooled concave, brushed, and tooled to a final finish.
Furnish and install one (1) two-piece adjustable anchor every 16” O.C. over sheathing and insulation by others.
Furnish and install 40mil self-adhesive flashing over 1.5” S.S. drip edge at the base of masonry and over/below openings in masonry with cell vent “weeps” installed in masonry head joints every 24” O.C.